Buy Behringer EP2000 online | Behringer EP2000

2 x 1,000 Watts into 2 ohms; 2 x 750 Watts into 4 ohms; 2,000 Watts into 4 ohms (bridge mode)
Precise Power, Signal and Clip LEDs to monitor performance
XLR and 1/4" TRS input connectors for compatibility with any source
Professional speaker connectors and "touch-proof" binding posts support most speaker wiring systems
Selectable low-frequency filters (30Hz or 50Hz) remove distracting infra-sound frequencies
Independent limiters per channel offer reliable protection against overload and distortion
High-current toroidal transformer for ultra-high transient response and absolute reliability
Ultra-reliable Toshiba/Fairchild power transistors
Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers without shutting down the show
Back-to-front ventilation system including air filter for reliable operation
"Built-like-a-tank," impact-resistant, all-steel 2U rackmount chassis
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by Behringer Germany

20Hz“20kHz @ 0.1% THD, both channels driven:
8 ohms per channel - 350W
4 ohms per channel - 500W
2 ohms per channel - 650W
RMS @ 1% THD (sine wave), bridged mode:
8 ohms - 1000W
4 ohms - 1300W
Peak Power, both channels driven:
8 ohms per channel - 400W
4 ohms per channel - 750W
2 ohms per channel - 1000W
Peak Power, bridged mode:
8 ohms - 1500W
4 ohms - 2000W
Distortion : <0.01%
Frequency Response:
At 10dB below rated output Power - 20Hz“20kHz,
At -3dB points - 5Hz“50kHz
Damping Factor: >300 at 8 ohms
Noise: -100dB unweighted, 20Hz“20kHz
Voltage Gain: 40X (32dB)
Input sensitivity: 1.15V (+3.4dBu) VRMS at 8 ohms
Input impedance: 10kOhm unbalanced, 20kOhm balanced
Front: Power switch,gain control (channels 1 and 2)
Rear: DIP switches (10x)
Indicators:
Power: Green LED
Clip: Red LED, 1 per channel
Signal: Yellow LED, 1 per channel
Inputs: Balanced XLR and 1/4" TRS connectors
Outputs: Touch-proof binding posts and professional speaker connectors
Cooling: Continuously variable-speed fan, back-to-front airflow
Amplifier Protection: Full short-circuit, open circuit, thermal, and HF protection
Load Protection: Turn on/off muting, AC coupling
Circuit Type: Class AB complementary linear output