IMPORTANT FEATURES – A-Guard protection system Includes overload limiter with optimized attack time. Unlike other solutions which depend on separate circuits to address different problems, A-Guard was developed as centralized solution where all protection requirements work together in perfect harmony. A-Guard is only applied when it´s necessary to protect the amplifier. This is the reason VA amplifiers are able to sustain full power output even under complex capacitive loads. Smart Overheat Management Audiocenter’s Smart Overheat Management gives VA series the ability to perform in high temperature environment without thermal shutdown. This unique circuitry monitors the amplifier´s temperature in real time and when the safe operation of the amplifier is compromised, the output power is reduced but not shut down thereby ensuring that your show goes on. Class H+ Circuit Design Eliminates Cross Switching Distortion After many years of R&D Audiocenter has created a new circuitry to eliminate the Class H cross switching distortion, this is done by the accurate time alignment compensation on the critical switching path. The result is the same low distortion as Class AB. In fact, all VA amplifiers offer distortion less than 0.01% THD at 16KHz, half power. This makes these babies very clean sounding, sweet and natural. We call it Class H+ and it´s only available in Audiocenter amplifiers.. Phase Response & Frequency Response (tested by AP) The advantages of Class H+ can be seen and measured in real world. Phase and frequency response performance are close to perfect and we clearly lead the category, thanks to our Class H+ topology.

No Downloads